Views
This wiki is deprecated and we suggest you look here:
https://github.com/synthetos/TinyG/wiki
TinyG
Please note: This wiki is deprecated and we suggest you look over here: TinyG Wiki
This wiki is still useful for settings and configuration for release 0.94 and earlier, but once we migrate those settings over we'll be shutting down this wiki.
TinyG is a fully featured CNC motion control system. The links below have all the information you need to explore, purchase, download, flash and use the TinyG CNC motion control system.
What is TinyG - TinyG Explained.
Getting TinyG - Downloading the lastest TinyG firmware and Flashing TinyG.
Getting Started - Configuring, Connecting and Flashing TinyG guide.
Wiring TinyG - Physically wiring TinyG to your stepper motors and setting motor current.
Connecting TinyG - Connecting a Terminal to TinyG.
Configuring TinyG - Configuring TinyG to your hardware specifics settings.
Using TinyG - Using the TinyG console and GUI program to control TinyG.
TinyG in Action! - A listing of TinyG being used.
Additional Links and Information
The guides above are a good starting place for general information. However if you find yourself stuck and need further assistance, please feel free to jump over to the troubleshooting Synthetos Forums.
More info:
- Updating TinyG Firmware - Details on using AVR Studio to update your TinyG firmware.
- Upgrading TinyG Firmware using AVRdude (Flashing TinyG) DEPRECATED, SEE ABOVE
- TinyG Hardware Info - Pinouts and other notes on hardware
- TinyG Stepper Motor Knowledge Base
- TinyG Gcode Support
- TinyG Developer Info - Notes about the internals of the code. Meant as a supplement to the code comments
- JSON commands - Notes on JSON implementation and use
- State Models - Internal state machine
- Recent Updates and Requested Features
- TinyG References